Interested in what the newest addition to the world of electronic cigarettes is? It’s the geekvape aegis boost Pod Mod. Geeks are always looking to improve on current technology, and this mod is the very best of the best when it comes to technology. Able to support both Pod and RDA up to forty watts, the Geekvape aegis boost pod mod is capable of delivering the best vapor and flavor producing experience from your favorite electronic cigarettes. This is a must-have if you’re a connoisseur of electronic cigarettes.
The AEGIS Boost Pod Mod comes with a Pod that can support the use of both Pod-RTAs and standard RDA batteries. If you prefer, there is also a replaceable battery option that allows you to change out the battery for a longer (or shorter) term of use. It will charge to a full capacity of your AEGIS Boost System while it charges. There is no need to connect the unit to your computer or an external power supply like some other similar models. It has a built in charger that allows you to enjoy charging at any convenient time.
One of the most unique features of this mod is the inclusion of an airflow control. Using the included dual airflow tubes, you can control the amount of vapor produced by your AEGIS Boost Pod. The dual airflow tubes allow the user to adjust the airflow to his or her preferences. In addition to controlling how much vapor is produced, you can also adjust the airflow pattern of the AEGIS Boost Pod to completely cover your target area. There is even a remote control feature that allows you to take full control over the airflow and temperature of the pod.
In order to ensure that the AEGIS Boost Pod mod kit is protected from damage, there is a warranty. This warranty will cover any defects in materials or workmanship. It will also cover the battery and any damage resulting from negligence. With a warranty, you have peace of mind that when something goes wrong you are covered.
Although this particular AEGIS Boost Mod is equipped with a high performance motor, there is a low output power level. Because of this, users may notice a delay when the pods are being fired. Because of this, users are recommended to not utilize a high output voltage and a low wattage in order to obtain the best results. In most cases, a standard voltage and a low wattage are sufficient for the AEGIS Boost Pod to function correctly.
If you are not sure of how to load the AEGIS Boost Pod with the coils, a video walk through can be found on the web site for this particular product. In this instructional video, a guide is provided that shows a couple different ways to load the kit with the coils. The first method involves placing the outer cover of the AEGIS Boost Pod on the heating element, while the second method requires the use of a feeding tube.
To heat up the aegis boost mod kit, it’s recommended that you use a triple barrel heater. For this method, a triple barrel heat exchanger is used. In order to heat the coils, all you need to do is place the heating element into the tank of the AEGIS Boost Pod. Once this has heated up, it’s necessary to place the stainless steel coils into the hoops.
As a final step in the process, you must install the batteries into the AEGIS Boost Pod. With the batter attached, turn the power to the amp on. You will receive a positive reading when the meter displays full pressure. Then remove the battery and connect the electric wires to the corresponding terminals on the AEGIS Boost Pod. This should now be completed.